5mm 6v Pre-Wired Warm / Soft White LED - Ultra Bright (4v, 5v, 6v)
In stock
- SKU
- 6V5MMPREWIREDWARMWHITE
- Color
- Warm / Soft White
- Size
- 5mm Pre-Wired Round Top
Description / 5mm 6v Pre-Wired Warm / Soft White LED - Ultra Bright (4v, 5v, 6v)
The 5mm 6V Pre-Wired Warm White LED ships ready to install with Approximately 15cm (6 inches) leads and a built-in current-limiting resistor. Connect directly to USB power bank (5V), 4×AA battery pack (6V), Lemax Christmas village adapter (4.5V), Arduino 5V pin, or Raspberry Pi GPIO — no resistor calculation and no extra components needed. The preferred choice for lemax christmas village building interiors, dollhouse room lighting, and usb-powered display projects.
Warm white (~3000K) produces the realistic warm glow of incandescent lighting — the most natural-looking choice for miniature building interiors and holiday displays.
The 5mm (T-1¾) head is the most popular standard DIP size. Fits all standard 5mm LED holders, bezels, and panel-mount clips. Versatile for model railroad structures, automotive, RC vehicles, and panel indicators.
| Size | 5mm (T-1 3/4) |
| Operating Voltage | 3V – 6V DC (3V, 4V, 5V, and 6V) |
| LED Forward Voltage | 4v-6v (volts) |
| Drive Current | 20mA typical |
| Brightness | 13,000-16,000mcd |
| Viewing Angle | 20-30 Degrees |
| Wire | Approximately 15cm (6 inches) leads, heat-shrink protected connections |
| Resistor | Built-in — no external resistor needed |
Designed for
- Christmas village displays: Compatible with Lemax 4.5V DC adapters. Light up building interiors, storefronts, and scene accessories with a warm, even glow. Most village builders use 10–30 LEDs per display scene.
- USB-powered projects: Connect to any 5V USB power bank, wall adapter, or computer port for portable displays, desk builds, and travel dioramas.
- Arduino and Raspberry Pi: Direct-connect indicator for 5V GPIO output or 3.3V logic — no breadboard resistor needed. Simplifies wiring for beginner maker projects.
- Dollhouse and miniature interiors: 5mm head is visible in most miniature scales. Battery-powered (4×AA pack = 6V) for cord-free operation.
- Cosplay and props: Hide a 4×AA battery pack inside a costume piece and wire directly — no resistor calculations, no bulky controllers. Blue and white are the most popular for armor and weapon glow effects.
- Portable dioramas and displays: Battery-powered military, architectural, and scale model displays for shows, competitions, and trade presentations.
Note: Department 56 village accessories use 2.5–3V adapters, which are at the very bottom of this LED’s operating range. We recommend our standard component LEDs with a matching resistor for Department 56 builds.
Wiring
Red wire = positive (+). Black wire = negative (−). Reversing the wires will not damage the LED, but it will not light. Factory leads are Approximately 15cm (6 inches) leads with heat-shrink protected joints. For wiring tips, extending leads, and connecting multiple LEDs, see our Pre-Wired LED Voltage Guide.
Which voltage do I need?
Not sure which voltage tier matches your power source? See our complete Pre-Wired LED Voltage Guide — covers automotive, model railroad, USB, Arduino, Christmas village, guitar pedal, and battery-powered projects with a quick-reference table.
Department 56 village accessories use 2.5–3V adapters, which are below the operating range of these pre-wired LEDs.
Complete your project
- Hook-up wire — extend your leads with 24–26 AWG stranded wire, splice with solder + heat shrink
- Switches — toggle, rocker, and mini slide for on/off control
- Power supplies — wall adapters and battery holders for your voltage
- 5mm LED Holders / Bezels — snap-in panel-mount clips
- Heat shrink tubing — protect extended wire joints
Frequently Asked Questions
Sold individually (1 LED per quantity ordered).
More Information
| Size | 5mm Pre-Wired Round Top |
|---|---|
| Color | Warm / Soft White |
| Operating Voltage | 3v-6v (volts) |
| Wire Length | Approximately 15cm (6 inches) |
| Resistor Built In | Yes |
| Additional Resistors Required | No |
| Luminosity/Brightness | 13,000-16,000 mcd |
| Forward Voltage | 4v-6v (volts) |
| Shrink Wrapped Connections | Yes |
| Current | 20mA |
| Wavelength | N/A Warm White |
| Viewing Angle | 20-30 Degrees |
| Mount Style | Custom |
| Lens Color | Clear |
| LED Brightness Class | Super/Ultra/Extreme |
Customer Images
Share your photos of this product in action! Uploaded images require approval before display. Please do not include watermarks — watermarked images will be declined. By uploading, you agree that your images may be used as product photos, in tutorials, or related content. Customer photos may not exactly represent this product. Items shown may be modified, and LED colors may appear different due to the difficulty of capturing true light colors on camera.