White - PLCC2/3528 12V LED Strip - Adhesive Backing - Water Resistant - 5m Roll / Reel


Availability: In stock


Quick Overview

Super bright white plcc2 3528 12v (volts) led strip with adhesive backing and waterproof! Use them for Xbox 360 mods, PS3 mods, Wii mods and many other electronics. Great for car mods too!

White - PLCC2/3528 12V LED Strip - Adhesive Backing - Water Resistant - 5m Roll / Reel

More Views


This is a Whole Reel / Roll = 5 Meters (16.4 Feet).

Hooking up LEDs could never be easier! You don't have to worry about resistors or anything of that nature. Simply add your 12v power and ground to the strips and watch them GLOW!! Watch your project illuminate better than ever with these 12v Cool / Clear White LED strips!

The led strips can be cut every 5 centimeters (cut between contact points). Power and Ground solder points, to add power to the strips, are labeled clearly.

This is one of the most versatile and easy to use led products out there to make any project look amazing. The strips are very bright and have high quality 3M adhesive backing (peel and stick). The strips are very flexible, so they can go around corners and in tight areas.

Common Uses of these LED Strips

  • Console Lighting
    • Microsoft Xbox 360
    • Microsoft Xbox 360 Slim
    • Microsoft Xbox One
    • Sony Playstation 3 (PS3)
    • Sony Playstation 4
    • Nintnedo Wii
  • Cabinet Lighting
  • Kitchen Lighting
  • Under Cupboard Lighting
  • Accent Lighting
  • Car Lighting
  • Marine/Boat Lighting
  • Halloween Lighting
  • Anything else you can imagine

Note: The strips are water resistant, not waterproof. The coating on the outside of the strips that makes them water resistant does not take kindly to freezing temperatures if they are bent. It is recommend to make perfectly straight "runs" with the strip if you anticipate it will be subjected to cooler weather.

Additional Information

Size 12v Strip - 3528 / PLCC2 - 8mm Width
Color Cool / Clear White
LED Count 300 LEDs / 5m (meters) - 3 LEDs / 5cm (one section)
Operating Voltage 12v DC
Drive Mode Constant Voltage (12v DC)
Flexibility Flexible
Mount Style 3M Adhesive Backing Tape
Current 24 Watts / 5m (meters) - 20mA / 5cm Section
Dimensions Width: 8mm Height: About 2.5mm Length: 5cm - 5m (meters)
Operating Temp. (Temperature) Recommended Range = -20C - 50C (-4F - 122F)
Waterproof / Resistance Waterproof / Resistant - IP65
Viewing Angle 120 Degrees
Luminosity/Brightness 270 - 300 Lumens / Meter
Wavelength N/A Cool White
Resistor Built In Yes
Additional Resistors Required No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Upload images for this product

You may upload your own images that portray this specific product being used. We do ask that you do not watermark them in any way and such images will be declined. Images that are accepted may be used as product images, in tutorials, or other related articles. By uploading an image, you accept to these terms. These images may not directly represent the product on this page. The items shown may have been modified/changed and the images are shown for demonstration, ideas, and creativity only. Colors depicted in the photos may also be "skewed" from difficult nature of capturing true light colors with a camera.