Green - PLCC6/5050 12V LED Strip - Adhesive Backing - Waterproof - 5cm Section

In stock
Super bright green plcc6 5050 12v (volts) led strip with adhesive backing and waterproof! Use them for Xbox 360 mods, PS3 mods, Wii mods and many other electronics. Great for car mods too!
You may upload your own images that portray this specific product being used. We do ask that you do not watermark them in any way and such images will be declined. Images that are accepted may be used as product images, in tutorials, or other related articles. By uploading an image, you accept to these terms. These images may not directly represent the product on this page. The items shown may have been modified/changed and the images are shown for demonstration, ideas, and creativity only. Colors depicted in the photos may also be "skewed" from difficult nature of capturing true light colors with a camera.

Each quantity represents 5 cm (about 2 inches) of LED tape (3 leds per section). Quantity discounts can be viewed near the add to cart button and are automatically applied.

The led strips can be cut every 5 centimeters, so if you order more than 1 they will be in one continuous strip unless more than 100 is ordered (5 meters or roughly 5 yards). Power and Ground solder points, to add power to the strips, are labeled clearly.

This is one of the most versatile and easy to use led products out there to make any project look amazing. The strips are very bright and have high quality 3M adhesive backing (peel and stick). The strips are very flexible, so they can go around corners and in tight areas.

Common Uses of these LED Strips

  • Console Lighting
    • Microsoft Xbox 360
    • Microsoft Xbox 360 Slim
    • Sony Playstation 3 (PS3)
    • Nintnedo Wii
  • Cabinet Lighting
  • Kitchen Lighting
  • Under Cupboard Lighting
  • Accent Lighting
  • Car Lighting
  • Marine/Boat Lighting
  • Anything else you can imagine
More Information
Size12v Strip - 5050 / PLCC6 / 1210 - 10mm Width
ColorPure Green
LED Count300 LEDs / 5m (meters) - 3 LEDs / 5cm (one section)
Operating Voltage12v DC
Drive ModeConstant Voltage (12v DC)
Mount Style3M Adhesive Backing Tape
Current72 Watts / 5m (meters) - 60mA / 5cm Section
DimensionsWidth: 10mm Height: About 3mm Length: 5cm - 5m (meters)
Operating Temp. (Temperature)Recommended Range = -20C - 50C (-4F - 122F)
Waterproof / ResistanceWaterproof / Resistant - IP65
Viewing Angle120 Degrees
Luminosity/Brightness850 - 900 Lumens / Meter
Resistor Built InYes
Additional Resistors RequiredNo
Write Your Own Review
You're reviewing:Green - PLCC6/5050 12V LED Strip - Adhesive Backing - Waterproof - 5cm Section
Your Rating
Lighthouse LEDs, LLC Payment Methods
© 2021 Lighthouse LEDs, LLC Store. All Rights Reserved.