Xbox 360 controller

  1. Power Points in Xbox 360 Controllers for LEDs

    The max voltage rating at these points is right at 3.5v. It does get lower depending on the batteries you are using and how much power they have left, but the max voltage is 3.5v and it is recommended that you base your led mods off of this number for the best results.
  2. Xbox 360 Ring of Light Controller Mod / LED Swap

    What you will need:   20-30 Watt Soldering Iron (we, at niktronix use 30 Watt) Rosin Core 60/40 .40 Solder Soldering Stand (highly recommended) Tweezers (can't do it without these) Four 0603 SMDs in your choice of color Xbox 360 Controller Look at our Polarity Guide if you don't know the which side is + and - for your 0603 SMD...
  3. How to Open the Xbox 360 Controller

    What you will need for this tutorial: Security Torx T8 Driver Simply remove the screws as shown on the following spots. Don't forget the 'hidden' screw underneath the bar code behind the battery cartridge (it is shown in the picture). This one gets most people the first time. Once this is done place or hold the controller with the top facing...

3 Item(s)

Lighthouse LEDs, LLC Payment Methods
© 2021 Lighthouse LEDs, LLC Store. All Rights Reserved.