leds

  1. How to Wire LEDs - 101 - Wiring LEDs in Parallel

    This is the second part in a a multi-part series on how to wiring LEDs.   Wiring LEDs in parallel can be very similar to wiring single LEDs. Really, it is simply "tying" all of your single LEDs together and using a common + and - to power them. There are a couple ways to wire LEDs in parallel. One...
  2. How to Wire LEDs - 101 - Single LED Example + Formulas

    We are going to show you several ways to wire LEDs. You can use the video below to follow through this post. This is a basic understanding of how to wire LEDs, however this article will allow you to wire LEDs in 99% of all scenarios. The very basics of wiring an LED will involve your power supply (DC/Direct Current...
  3. Xbox 360 Wired and Wireless Controller AXBY SMD LED Light Mod

    The first thing you need to do is take apart your controller so you have just the board. Please check the link below to do this if you do not already know how:How to Open The Xbox 360 ControllerOnce this is done you will need the following items:4 x 0603 SMDsWireSolderSoldering IronHot Glue GunResistors (make sure you have the correct...
  4. Nintendo Wii Player Indicator LED Mod

    Opening the WiiMote (Controller)This is a very simple task. You need to look at the controller from the backside and then observe the screws. Use a Tri-Wing Screwdriver to remove all of the visible screws. There are no hidden ones that you should be worried about. Once the screws are removed simply remove the bottom part of the shell with...

4 Item(s)

Lighthouse LEDs, LLC Payment Methods
© 2021 Lighthouse LEDs, LLC Store. All Rights Reserved.