custom rol

  1. Original Xbox 360 (Phat) ROL Board Install / Removal

    What you need and what needs to have been done:   Open Xbox 360 Security Torx T8 Remove the plastics cover off of the ROL Board or (RF Board)   Then remove the three screws with the T8 screw driver.   Finally pull the board out. It is plugged in at the lower left of the board.   Lastly, plug...
  2. Original Xbox 360 (Phat) Ring of Light LED Change - Modification

    What you will need:   20-30 Watt Soldering Iron (we, at Lighthouse LEDs, use 30 Watt) Rosin Core 60/40 .40 Solder Soldering Stand (highly recommended) Tweezers (can't do it without these) Five 0603 SMDs in your choice of color (9 if installing error lights) Xbox 360 ROL Board30 AWG Wire (optional, only if installing error lights) A pair of pliers and...

2 Item(s)

Lighthouse LEDs, LLC Payment Methods
© 2021 Lighthouse LEDs, LLC Store. All Rights Reserved.