Here we will walk you through the installation of any of the custom Xbox 360 controller parts. I would recommend that you take a look through the video to get a good idea on how to install the appropriate parts and also pick up on a couple tips that may make it easier and quicker as well. Here is the...
controller
-
How to tell the Difference Between a New CG and the Old Matrix Boards for the Xbox 360 Controllers
It is pretty straight forward. In the new CG you can see some added electrical components inside the red circle of the picture. On the old Matrix board those components are not there. -
Xbox 360 Wired and Wireless Controller AXBY SMD LED Light Mod
The first thing you need to do is take apart your controller so you have just the board. Please check the link below to do this if you do not already know how:How to Open The Xbox 360 ControllerOnce this is done you will need the following items:4 x 0603 SMDsWireSolderSoldering IronHot Glue GunResistors (make sure you have the correct... -
XCM Controller Case Installation Directions - All Versions
XCM CONTROLLER SHELL INSTALLATION GUIDE Here are the directions for the installation of all XCM controller cases. Please read through the entirety of the article before starting. If you have any questions please feel free to ask. A couple things to watch out for: Controller Version Bridging points with solder "trapping" buttons on assembly (bumpers and sync button) Wires getting...